Grooming / PRIVATE-LABEL DEVELOPMENT

Slicker brush

Pin gauge, angle and tip finish decide whether it grooms or scratches. These are tooling values, so lock them on an approved sample before production.

Terracotta / COLOR PREVIEW

Form, material and finish.

Materials Stainless-steel pins with smooth tips; TPR overmoulded handle

Construction Pinned cushion pad set into a moulded head and handle

Branding Pad print or moulded-in logo on the handle

Packaging Custom packaging is available. Format, material, dimensions, logo and barcode placement are agreed for your order.

Typical MOQ 100–500 units; Typical range; confirmed by product, color, size and customization.

Stock-item custom sample Within 7 days

Fully custom sample Within 15 days

Shipping Sea freight, air freight or express courier

Request a quote for this product Download development sheet

Confirm your selected size, material and customization in the quotation.

8 CUSTOM COLOR DIRECTIONS

Choose a color. See it now.

Terracotta

Custom logo

Custom packaging

Choose a logo direction for this product. The material, placement and process must match the branding specification below; packaging-only branding does not change the product body.

Digital color preview for development planning. Confirm final color, material, logo process and packaging on a physical sample and written specification.

01 / PURPOSE & CONSTRUCTION

Pin geometry is the product

The entry SKU of a grooming range.

Pinned cushion pad set into a moulded head and handle.

Pin tips must be verified rounded on every lot; this is the main complaint driver.

Grooming product manufacturing reference

02 / CUSTOMIZATION

Slicker brush

Choose the material, branding position and packaging for your brief. Confirm the combination on the sample before production.

Material direction

Stainless-steel pins with smooth tips; TPR overmoulded handle

A recognizable identity

Pad print or moulded-in logo on the handle

Custom packaging for your channel

Custom packaging is available. Format, material, dimensions, logo and barcode placement are agreed for your order.

03 / SIZING

Reference sizes
and sample measurements.

Overall length: approx. 15–20 cm; brush head: approx. 6 × 4, 9 × 5 or 12 × 6 cm.

Reference sizes for selection and sampling. Final dimensions, tolerances and material combinations are agreed in the written specification.

Factory reference: FSR-027 · 10 October 2026

The checklist names measurements to agree for your sample; it is not a completed size chart. Request the detailed specifications for your selected construction.

Sample brief checklist
Measurement to define	Record for the selected sample
Pad size	Value, unit and agreed tolerance
Pin length	Value, unit and agreed tolerance
Pin gauge	Value, unit and agreed tolerance
Pin angle	Value, unit and agreed tolerance
Finished weight	Value, unit and agreed tolerance
Packed carton volume	Value, unit and agreed tolerance

04 / SAMPLE REVIEW

What to check
on the sample.

Tip rounding under magnification, pin retention pull test, pad flex.

Wipe clean; remove hair after use.

Agree the inspection method, applicable requirements and acceptance criteria for your actual market and product. Test reports must correspond to the approved material and finished item.

Get the sample review checklist

05 / PACKAGING

Confirm the pack-out.

Confirm unit packaging, product identification, care copy, barcode, carton count and packed dimensions. Approve artwork on the actual packaging format.

06 / TIMELINE

A schedule built on approvals.

Brief → material review → sample → revision → pre-production approval → inspection → shipment handover. Sampling and production dates depend on the agreed specification and approvals.

See every stage

PRODUCT EVIDENCE MATRIX

Records for your selected product.

Use this checklist to confirm an order-specific product specification.

Each item should point to a physical sample, drawing, material record, test method or approved artwork. Evidence is confirmed for the exact product and order; a category claim alone is not enough.

Open the supplier trust center

Decision	What your team should approve	Evidence to retain
Product identity	SKU, intended use, target market and approved sample version	Signed specification and sample reference
Materials	Fiber or polymer type, grade, thickness, finish and color reference	Supplier record, swatch or order-specific test report
Dimensions & fit	Overall length: approx. 15–20 cm; brush head: approx. 6 × 4, 9 × 5 or 12 × 6 cm.	Dimension drawing, size chart and tolerance record
Construction	Pinned cushion pad set into a moulded head and handle	Seam, hardware or assembly checkpoints with photos
Performance & care	Tip rounding under magnification, pin retention pull test, pad flex; Wipe clean; remove hair after use	Agreed method, acceptance criteria and care copy
Branding & packaging	Logo method, placement, artwork, labels, barcode, unit pack and carton count	Approved artwork and packaging sample

COMMERCIAL TERMS

Confirm the order in writing.

Published planning ranges help you start. Final values belong in the product-specific quotation and purchase agreement.

Term	Published planning information	What must be confirmed
MOQ	100–500 units	Typical range; confirmed by product, color, size and customization.
Stock-item custom sample	Within 7 days	Artwork, available base item, sample fee and delivery method
Fully custom sample	Within 15 days	Specification freeze, tooling or development fee and revision scope
Bulk production	Confirmed in quotation	Quantity by SKU/color/size, approval date and production schedule
Payment & trade terms	Not publicly stated	Currency, deposit/balance, Incoterm, named place and banking details on formal documents
Packing & freight	Sea freight, air freight or express courier	Unit pack, carton count, carton dimensions, marks, route and freight responsibility

BEFORE YOU REQUEST A QUOTE

Questions buyers ask about the slicker brush.

What is the MOQ for a private-label slicker brush?

Typical MOQ is 100–500 units, confirmed by product, color, size and customization.

How long does a slicker brush sample take?

A stock-item custom sample can be prepared within 7 days after the artwork and details are confirmed. A fully custom sample can be prepared within 15 days after the specification is confirmed.

What materials and construction can a slicker brush use?

Stainless-steel pins with smooth tips; TPR overmoulded handle. Pinned cushion pad set into a moulded head and handle.

What should be checked on a slicker brush sample?

Tip rounding under magnification, pin retention pull test, pad flex. Wipe clean; remove hair after use.

What is a slicker brush not meant for?

Pin tips must be verified rounded on every lot; this is the main complaint driver.

GUIDES FOR THIS PRODUCT

Best pet grooming and hygiene products to private label in 2026: 5 ranked Slicker brush pins: the four numbers that belong in your specification 5 questions to settle before quoting private-label training pads Litter mat edge curl and layer separation: what to settle in the brief before tooling

Explore Catidog

Slicker brush

Choose a color. See it now.

Pin geometry is the product